 |
|
Carbon Steel Bars| Grade Description | |
| C1018 | |
| C1045 | |
| C1117 | |
| C11L17 | |
| C1141 | |
| Stressproof® A311 Class B | |
| C12L14 | |
| C1215 | |
| Fatigueproof® | |
| E.T.D. 150® |
| Size Chart |
| C1018 | |
| C1045 | |
| C12L14 | |
| C1215 |
| C1018 | |
| C1117 | |
| C12L14 | |
| C1215 | |
| Stressproof® |
| C1018 | |
| C11L17 |
| C1020 & C1060 |
Structural| Bar Size ASTM A-36 | |
| Structrual, ASTM A-36 |
| Bar Size, ASTM A-36 | |
| Ship and Car, ASTM A-36 | |
| Structural ASTM A-36 Modified | |
| Structural ASTM A-36 | |
| Stair Stringer (Junior) Channels ASTM A-36 |
| Standard I Beam, ASTM A-36/A572-50 | |
| Junior Beams, ASTM A529-50 | |
| Wide Flange and H Beams, ASTM A992/A572 |
| Bar Size |
| Structural Shapes |
Plate| ASTM A-36 Technical Information | |
| C1020 Technical Information | |
| C1045 Technical Information | |
| C1008 Technical Information | |
| Hot Rolled Plate Sizes |
| A-516 Gr. 70 Plate Sizes |
| C1119 Modified Technical Information | |
| FM15® | |
| C1144 Modified Technical Information | |
| Clean-Cut 20®/LFM 20 | |
| Free Machining Plate Sizes |
| Abrasion Resisting Plate Technical Information | |
| Abrasion Resisting Plate Sizes | |
| Manganese Technical Information |
| SlipNot® Products |
Carbon Sheet| HR Sheets/Pickled & Oiled | |
| HSLA Sheets | |
| SCS Sheet |
Tubing And Pipe| Square | |
| Rectangular. |
| KleenKote® Product Description | |
| EPOXZKOTE® Product Description | |
| Square Tubing Sizes | |
| Rectangular Tubing Sizes | |
| Pipe Sizes |
| Cold Drawn Seamless | |
| D.O.M. (Drawn-Over-Mandrel) |
| Size Chart |
| Size Chart |
| Mechanical Tubing | |
| Structural Tubing | |
| Cold Drawn Seamless Tubing | |
| Cold Drawn Seamless Wall Thickness | |
| DOM Tubing Diameter | |
| Structural Pipe | |
| Tested Pipe (A-53) | |
| Hydraulic Tubing - (Seamless) |
Alloys| Hot Rolled Alloy Bars | |
| Size Tolerances - Rounds | |
| DCF Tolerances - Flats & Squares | |
| Thickness and Width | |
| 4140 HRA and 8620 HR Flats | |
| Standard Manufacturing | |
| Cold Finished Alloy Bars |
Stainless| Grade 201 | |
| Grade 303 | |
| Grade 304 and 304L | |
| Grade 309 | |
| Grade 316 and 316L | |
| Grade 321 | |
| Grade 347 | |
| Grade 416 | |
| Grade 420 | |
| Grade 430 | |
| Grade 440C | |
| Grade 17-4 PH (630) |
| 303, 304/304L, 316/316L, 416 | |
| 321, 347, 17-4, 440C, 420 |
| 304 |
| 303, 304/304L, 316/316L, 416 |
| 303, 304/304L, 316/316L, 416 |
| 303, 304/304L, 316/316L |
| 201, 304/304L, 316/316L | |
| 430 |
| 304/304L, 316/316L | |
| Tread Plate |
| Angle - 304/304L | |
| Channel - 304 |
| Ornamental Tubing - 304 | |
| Round Tube - 304 | |
| Welded Pipe - 304, 316 |
Aluminum| Alloy Descriptions and Applications | |
| Mechanical Properties |
| 7075-T651 Rounds |
| 6061-T6511 Rounds | |
| 6262-T6511 Rounds | |
| 6061-T6/T6511 & 6262-T6511 Comparison of Tolerances | |
| Typical Physical Properties | |
| Comparison of Aluminum Alloys |
| 6061-T6 and 6262-t6 Hexagons | |
| 6061-T6511 Squares | |
| 6061-T6511 Rectangles |
| Selection Guide |
| 6061-T6 Angles | |
| 6063-T52 Angles | |
| 6061-T6 Channels | |
| 6061-T6 I-Beams | |
| 6061-T6 Wide Flange Beams | |
| 6061-T6 H-beams | |
| 6061-T6 Tees |
| 6061-T6511 ACC-U-PLATE |
| Alloy Descriptions and Applications |
| Alpaslpase® K100-S™ | |
| MIC 6 | |
| ALCA 5® |
| DURA-MOLD® | |
| MAX 5® | |
| M1® & M5® |
| 3003-H22 Bright Reflective Finish Diamond Tread | |
| 6061-T6 Standard Mill Finish Diamond Tread |
| Alloy Designation System | |
| Temper Designation System | |
| Chemical Composition Limits | |
| Comparative Characteristics | |
| Specification Cross Reference | |
| Guide to Special Services and Processing |
Brass Copper| Rounds | |
| Squares | |
| Flats (Square Edge) | |
| Flats (Full Round Edge) | |
| Cold Rolled Sheet | |
| 110 Quarter Hard Copper Sheet | |
| 110 Half Hard Copper Sheet | |
| 110 Cold Rolled Copper Plate |
| Half Hard Tellurium Rounds |
| Hard Drawn Beryllium Rounds | |
| Beryllium Copper Plate Low Hard (Supra) | |
| Beryllium Copper Plate High Hard (Ultra) |
| RWMA Class 3 Rounds | |
| RWMA Class 3 Flats | |
| RWMA Class 3 Heat Treated Plate |
| RWMA Class 3 Rounds | |
| 180 Flats |
| RWMA Class 2 Rounds | |
| RWMA Class 2 Squares | |
| RWMA Class 2 Hex | |
| RWMA Class 2 Flats | |
| RWMA Class 2 Plate |
| Rounds |
Bronze| 932 (SAE 660) Bearing Bronze | |
| 954 Aluminum Bronze |
| 932 Rounds | |
| 954 Rounds | |
| 959 Rounds | |
| 932 Flats | |
| 954 Flats and Squares | |
| 959 Flats | |
| 932 Tubing | |
| 954 Tubing |
Tool Steel| A2, D2, 01, S7 |
| Notes |
| Grade Availability |
| Flats and Squares | |
| Rounds |
Flat Ground Stock Cast Iron| Type G1A | |
| Type G2 | |
| Type 65-45-12 | |
| Type 80-55-06 | |
| 201 Type 1 NI-Resist |
| Type G1A | |
| Type G2, Type 80-55-06 and Type 65-45-12 | |
| Ni-Resist |
| Type 65-45-12 Flats (Ductile Iron) | |
| Type G2 Flats (Gray Iron) |
| Type 65-45-12 Flats (Ductile Iron) | |
| Type G2 Flats (Gray Iron) |
| Type G2 (Gray Iron) |
| 2 Sides Milled and 4 Sides Milled, Stress Relieved |
| Type 65-45-12 (Ductile Iron) 4 Sides Duplex Milled |
| Type 65-45-12 (Ductile Iron) 4 Sides Duplex Milled..................... |
Expanded Metal And Grating| Standard Carbon Sheets | |
| Flattened Carbon Sheets | |
| Standard Type 304 Stainless | |
| Flattened Type 304 Stainless | |
| Standard Aluminum Alloy 3003 H14 | |
| Flattened Aluminum Alloy 3003 H14 | |
| Catwalk and Structural |
| Steel Grating | |
| Safety Grating | |
| Fiberglass Grating |
Miscellaneous| Carbon (1060) Standard Sizes | |
| Carbon (1060) Metric Sizes | |
| TOLERANCES | |
| Stainless (440 C) Standard Sizes | |
| Diamond Case Linear Shafting Specifications | |
| TOLERANCES |
Plastics| Servicing Warehouses | |
| Contact Information |
| General Selection Criteria | |
| Brief Product Descriptions |
| Custom Fiberglass Grids & Grating | |
| Visit the Alro Plastics |
Industrial Supply Data
Alro Philosophy And Information