| |
Continuous Cast Iron Bars
G2 Dura-Bar / Gray Iron
|
|
Description
|
Alro is a stocking distributor for Wells Manufacturing, the producers of the premier cast iron bars under the trade name of Dura-Bar. Cast irons are usually alloys that contain more than 2% carbon and from 1% to 3% silicon. Cast iron is offered in gray and ductile types. The primary difference in these types is the shape and distribution in their microstructure.
Dura-Bar offers a zero defect guarantee plus the inherent benefits of cast iron such as:
| |
- Improved Machinability
- Lower Tool Cost
- Decreased Downtime For Tooling Changes
- Reduced Scrap By Using Defect-Free Material
|
|
| Typical Applications |
Typical applications for G2 are listed below. They are classified by industry.
FLUID POWER: |
Cylinder Blocks, Glands, Manifolds, Pistons, Spools, Valves. |
| MACHINERY: |
Bushings, Gears, Gibs, Pulleys, Rams, Sheaves, Side Frames, Slides, Ways, Spindles, Housings. |
| TRANSPORTATION: |
Cylinder Liners, Gears, Lash Adjusters, Shock Absorber Pistons, Valve Guides, Valve Seat Inserts, Brake Rotors. |
| PUMP AND COMPRESSOR: |
Liners, Pistons, Rollers, Rotors, Seals. |
| OIL AND GAS: |
Bridge Plugs, Cement Plugs, Cones, Mandrells, Retainers, Slips. |
| MISCELLANEOUS: |
Aluminum Mold Plates, Bushings, Cams, Chain Sheaves, Core Boxes, Dies, Gears, Pattern Plates, Pulleys, Wheels. |
|
| Chemical Composition |
| Typical Analysis |
G2 |
| Carbon (C) : |
2.60 - 3.75% |
| Silicon (Si) : |
1.80 - 3.00% |
| Manganese (Mn) : |
0.60 - 0.95% |
| Sulfur (S) : |
0.07% max |
| Phosphorus (P) : |
.012% max |
| Other : |
|
|
| Mechanical Properties |
| Brinell Hardness |
183 - 301 |
| Tensile - PSI |
40,000* |
| Yield -PSI |
- |
| Elongation in 2" - % |
- |
|
 |
|
