Products
Metals Guide Catalog
Value Added Services
Locations & Contacts
Literature
Material Safety Sheets
Steel Links
Request a Quote/
    Submit a Print
Credit Application

I. Manufacturer/Distributor & Product Identification Distributor:
Alro Steel Corporation
3100 East High Street
Jackson, MI 49204

Reviewed & Revised: 12/21/95 by Alro Steel Corporation

Manufacturer: Various manufacturers
Chemical Family: Metals
Chemical Name & Synonyms: Steel

Emergency Phone Number: (517) 787-5500

II. Chemical Components

See section II-A, "Product Description & Hazardous
Ingredients/Identity Information" and II-B, "Percentile of Weight by Grade and Type of Material."

III. Physical Data

Melting Point °F: Greater than 2400
Specific Gravity(H20=1): Greater than 7.0
Vapor pressure: n/a
% Volatile by Volume: n/a
Vapor Density (Air=1): n/a
Evaporation Rate: n/a
Solubility in Water: Negligible
Appearance and Odor: Grayish to silvery odorless product in various shapes.

IV. Fire & Explosion Data

Nonflammable. Use fire-fighting methods appropriate for the surrounding area.

V. Health Hazard Information

See Section V-A, "General Health Hazard Information,"

VI. Reactivity Data

STABILITY: Stable
INCOMPATIBILITY: Not incompatible
HAZARDOUS POLYMERIZATION: n/a
HAZARDOUS DECOMPOSITION PRODUCTS: n/a
CONDITIONS TO AVOID: May liberate metal fumes & metal oxides if burned or welded.

VII. Spill & Leak Procedures/Environmental

Residue from cutting or grinding should be swept or vacuumed and placed in suitable containers for disposal in accordance with federal, state, or local waste disposal regulations. This material may be reclaimed for reuse. See section II-A for "Information concerning materials subject to SARA Title III reporting requirements."

VIII. Special Protection Respiratory Protection

When exposure limits are exceeded, use proper approved respirator. (Consult OSHA and/or state or local codes)

VENTILATION: Use local exhaust when cutting, grinding or welding.

EYE PROTECTION AND PROTECTIVE CLOTHING: Proper protective clothing and appropriate face and eye protection should be used when cutting, grinding, or welding. (Consult OSHA and/or state or local rules and regulations)

IX. Special Precautions

PEL/TLV exposures should be controlled to remain below OSHA and ACGIH specifications to ensure proper health protection of workers. The information in this MSDS was obtained from sources believed to be reliable. However, the information is provided without any representation or warranty, expressed or implied regarding the accuracy or correctness. The conditions or methods of handling, storage use and disposal of the product are beyond our control and knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use, or disposal of the product.