Alro Steel was established in 1948 by Al and Robert Glick and has grown to include Alro Plastics, Alro Industrial Supply and Alro Metals Outlet.

4140 HR Q&T

4140 HR Q&T
Chemical Composition
Carbon:               0.38%-0.43%
Manganese:          0.75%-1.00%
Chromium:            0.80%-1.10%
Silicon:                 0.15%-0.30%
Molybdenum:         0.15%-0.25%

4140 Hot Rolled Quenched & Tempered

Alro stocks 4140 Q&T -a steel in the family of SAE steel grades, as specified by the Society of Automotive Engineers (SAE). Alloying elements include chromium and molybdenum, and as a result these materials are often informally referred to as chromoly steel (common variant stylings include chrome-moly, CrMo, CRMO, CR-MOLY, and similar). They have an excellent strength to weight ratio and are considerably stronger and harder than standard 1020 steel, but are not easily welded (need pre and post weld thermal treatment to avoid cold cracking). While these grades of steel do contain chromium, it is not in great enough quantities to provide the corrosion resistance found in stainless steel. The Quenching process hardens the steel, while the Tempering process restores some of the ductility and removes some of the brittleness acquired during heat treating. 

 


Properties
The physical properties of 4140 Q&T greatly depend on the Heat Treating/Tempering processes that have been done to the material. If you need to meet specific physical properties for your application, please contact an Alro Sales Representative to make sure this material will meet your needs.
Typical Uses
Typical uses for 4140 include:
  • Jigs
  • Fixtures
  • Drill Collars
  • bolts
  • Stubs
  • Couplings
  • Axles
  • Shafting
  • Piston rods
  • Rams
  • Gears
GradeBuy ROUND
4140 HR Q&T