Alro Steel was established in 1948 by Al and Robert Glick and has grown to include Alro Plastics, Alro Industrial Supply and Alro Metals Outlet.

932 Bearing Bronze

932 Bearing Bronze
Chemical Composition
Copper:        83%
Tin:             7%
Lead:           7%
Zinc:            3%

Alloy 932 Bearing Bronze (ASTM B505)

Grade 932 Bearing Bronze is a high leaded tin bronze alloy. This bronze alloy is known for its excellent strength combined with excellent anti-friction qualities that make it very resistant to wear.  This combination is how 932 has come to be known as "Bearing Bronze" because it is often an ideal choice for bearing applications.
It should be noted that Grade 932, 954, and 959 bronze are continuous cast bronze products. This means they are are cast over-sized to allow for finish machining. 932 bronze also has an electrical rating of 12% that of copper.

932 bearing bronze is commonly found in industrial, automotive, appliance, aerospace, and any bearing and bushing applications having medium loads and speeds with adequate lubrication. 

Tensile Strength:         35,000 KSI
Yield Strength:            20,000 KSI
Elongation:                 10% (in 2")
*These numbers are "Typical" properties and may not be required to meet this grade. Please check with your Alro Sales Representative if physical properties are required for your application.*
Typical Uses
Due to it's excellent strength and resistance to wear, 932 Grade Bronze has many general industrial applications. A few include:
  • Bearings
  • Bushings
  • Light duty gears
  • Impellers
  • Sprockets
  • Wear strips
  • Washers
  • Plates
932 Bearing Bronze