Chemical Composition
Carbon: 0.38%-0.43%
Manganese: 0.75%-1.00%
Phosphorous: 0.35% (Max)
Sulfur: 0.04% (Max)
Chromium: 0.80%-1.10%
Molybdenum: 0.15%-0.25%
Lead: 0.15%-0.35%
|
41L40 Cold Finish Annealed
Alro stocks 41L40 CF Annealed - a chromium-molybdenun alloy steel that can be oil hardened to relatively high hardenability. The chromium content provides good hardness penetration, and the molybdenum imparts uniformity of hardness and high strength. Through variations in the method of heat treating 4140, an exceptionally wide range of properties can be attained. For this reason, it is often used as stock for forging, as 4140 has self scaling properties. 4140 responds readily to heat treatment and is comparatively easy to machine in the heat treated condition. The "L" means that lead has been added to the material for improved machinability.
Properties
Tensile Strength: 105,000 PSI
Yield Strength: 85,000 PSI
Elongation: 15% (in 2")
*These numbers are "Typical" properties and may not be required to meet this grade. Please check with your Alro Sales Representative if physical properties are required for your application.*
Typical Uses
Typical uses for 4140 include:
- Jigs
- Fixtures
- Drill Collars
- bolts
- Stubs
- Couplings
- Axles
- Shafting
- Piston rods
- Rams
- Gears
|
|
