Alro Steel was established in 1948 by Al and Robert Glick and has grown to include Alro Plastics, Alro Industrial Supply and Alro Metals Outlet.

15-5 Stainless Steel

15-5 Stainless Steel
Chemical Composition
Carbon:          0.07% (Max)
Chromium:       15%-15.5%
Copper:           2.5%-4.5%
Iron:               71.91%-79.85%
Manganese:      1.0% (Max)
Nickel:             3.5%-5.5%
Phosphorous:     0.04% (Max)
Silicon:             1.0% (Max)
Sulfur:              0.03% (Max)

15-5 Stainless Steel

Alro stocks 15-5 Stainless Steel - a grade known for being tough and ductile with good strength. The corrosion resistance of 15-5 Stainless Steel is similar to that of stainless steel type 304. It is most often used for applications in high pressure corrosive environments and for aircraft components. Hot working with type 15-5 Stainless Steel is preferable to cold working but it does exhibit moderate formability in cold working. Stainless Steel 15-5 is a precipitation hardening martensitic stainless steel.

15-5 is a variant of the older 17-4 chromium-nickel-copper precipitation hardening stainless steel. Both alloys exhibit high strength and moderate corrosion resistance. High strength is maintained to approximately 600 degrees F. The 15-5 alloy was designed to have greater toughness than 17-4. This improved toughness is achieved by reduced delta ferrite content and control of inclusion size and shape.



Properties
Tensile Strength:   208,600 PSI
Yield Strength:      200,900 PSI
Elongation:           9.4%

*These numbers are "Typical" properties and may not be required to meet this grade. Please check with your Alro Sales Representative if physical properties are required for your application.*
 
Typical Uses
Typical uses for 15-5 Stainless steel include:
  • Valves
  • Aircraft Parts
  • Gears
  • Pump Parts
  • Shafts
  • Fittings
  • Fasteners
GradeBuy ROUND
15-5