Alro Steel was established in 1948 by Al and Robert Glick and has grown to include Alro Plastics, Alro Industrial Supply and Alro Metals Outlet.
888-888-2576

AR400F Plate

AR400F Plate
Chemical Composition
Carbon:               0.12%-0.16%
Manganese:         1.55% (Max)
Phosphorus:         0.25% (Max)
Sulphur:              0.005% (Max)
Chromium:           0.55% (Max)
Nickel:                1.00%
Molybdenum:        0.55% (Max)
Silicon:               0.35%-0.55%
Boron:                0.0005%-0.005%
Smart Grid
GradeBuy PLATE
AR400/450F

AR400F Steel Plate

Alro stocks AR-400F and Hardox® 450 plate. AR-400F is a through-hardened abrasion resistant plate designed to satisfy the demand for a grade of steel that can give prolonged service life where abrasion is the primary cause of failure.  AR400F is quenched and tempered through hardened wear resistant grades of abrasion resistant steel plate used for high impact and abrasion resistance. AR400F has a minimum Brinnel hardness of 360. AR400F is produced through austentizing, water quenching, and tempering.

Hardox® 450 is an abrasion resistant brand with a hardness of 450 bhn. This brandof abrasion resistant plate is intended for higher, impact, wear applications wherecold-bending and very good weldability are beneficial.Hardox® 450 is a quenched and tempered produced plate that is used in Dump bodies,crushers, feeders, cutter edges, buckets, etc.

Other Abrasion Resistant Steel Plates that Alro Steel stocks include:
AR450F
AR235
AR500F
Hardox®
 



Properties
Typical Surface Brinell Hardness (HB):  360-444
Typical Uses
AR400F is used in equipment subjected to abrasive wear. Some potential applications are:
  • Truck beds
  • Buckets
  • Hoppers
  • Chutes
  • Bulldozers
  • Excavators
  • Cutting edges
  • Grates