65-45-12 Ductile Iron As Cast

Chemical Composition

Carbon: 3.50%-3.90%
Silicon: 2.25%-2.75%
Manganese: 0.15%-0.35%
Phosphorus: 0.00%-0.05%
Sulphur: 0.006%-0.025%

Dura-Bar 65-45-12 Ductile Iron As Cast

DURA-BAR® Type 65-45-12 is a Ductile Iron containing nodular graphite in a matrix of ferrite with small amounts of pearlite. Because of it's unmatched combination of machinability, mechanical properties and heat treat response, Grade 65-45-12 is the most often chosen material of all the Dura Bar iron types. The ferritic structure produces the most machinable ferrous grade of material available anywhere in combination with good surface finishes, optimal impact strengths, fatigue properties, electrical conductivity and high magnetic permeability. This iron has approximately the same tensile and yield strengths as AISI 1020 steel in the as-rolled condition. This specification conforms to ASTM A536 grade 65-45-12.

Properties

Tensile Strength: 65,000 PSI (Min)
Yield Strength: 45,000 PSI (Min)
Elongation: 12%

Typical Uses

80-55-06 Ductile Iron is typically used in:

Shafts
Bearing Caps
Moldings
Sprockets
Gears
Screws
Couplings
Bushings

Grade	Buy FLAT	Buy ROUND	Buy SQUARE
65-45-12 Ductile Iron As Cast

65-45-12 Ductile Iron As Cast

Dura-Bar 65-45-12 Ductile Iron As Cast

Metals Products

Metals Processing

Metals Resources