Noryl modified PPO is a strong, tough engineering plastic with outstanding mechanical, thermal, and electrical properties. Low moisture absorption and low thermal expansion make Noryl one of the most dimensionally stable thermoplastics available.

Noryl is widely used for electrical housings and structural components since it has excellent insulating properties, flame resistance, and dimensional stability over a wide range of service temperatures. Noryl is often selected for fluid handling applications since it has low moisture absorption and excellent strength and stiffness. Noryl is easy to fabricate, paint, and glue.

The following physcial property information is based on typical values of the base Noryl Modified Polyphenylene Oxide resin.

Product Applications

• Manifolds
• Pump, valve, and fitting applications
• Scientific and analytical instrument components
• Housings
• Covers
• Electrical components

Advantages of Noryl

• Excellent dimensional stability
• Low moisture absorption
• Good strength and stiffness over a wide range of service temperatures
• Good impact resistance
• High dielectric strength
• Easy to fabricate, paint, and glue
• Excellent flammability rating (UL94 V-1 @ .058" thick)

Manufacturing Capabilities

• Rod: 1/8" to 8" diameter
• Sheet: .030" to 6" thick
• Film: .001" to .029" thick
• Colors/Grades:
  • Black (standard)
  • Glass-filled (gray)
  • Custom colors available FDA compliant grades available on a custom basis

Compression Molded Sheet Sizes Available

• 30" x 60"
• 2' x 4'
• 4' x 8'
• 4' x 10'
• 5' x 10'
• 6' x 12'